Track lighting has been around for decades, and sometimes it can be time to replace. If your area grows in size or if you want to refresh your lighting setup in a room. Although less common than track lighting pendants and overhead lighting, you can replace track lighting. When it comes to replacing a track light, there are several options you can choose from. You can do this yourself if you want or I will show you how to replace track lighting
If your home has lighting that is attached to a track, this is probably an update. Over time, tracks tend to get damaged due to the high intensity of light bulbs. Some light bulbs tend to bend the metal over time and eventually break the integrity of the track. Later track lighting needs to be replaced due to various reasons. There are a few things to consider before replacing your existing track lights. These include the design of your home, lighting recommendations from an electrician, and the amount of money you want to spend. Replacing a broken, rusty or old track light is easier than many people believe.
Turn Off All Electricity In The Room
To replace the track light in your home, turn off the power to the circuit on the main breaker. Track lights come in two different styles: one that is wall mounted and the other that is mounted on or off the ceiling. Before replacing the track light, consider whether you want to mount it as a wall-mount or drop-down light.
Enter your ceiling junction and flip the switch or flip the circuit breaker for that circuit. Replacing track lighting is usually a simple procedure, but it carries some risks. One of these risks is the live electrical part that stays in your ceiling when you are installing new lighting fixtures.
Remove Old Track Lights
There is no need to put off the dilapidated lighting replacement in your home. In fact, it is a task you can easily do yourself. Most homeowners choose to remove the entire track lighting system and start from scratch, but this is not always necessary. This is also an option if you have a few bad fixtures in many. Some can only be accessed by screwing from the junction box or junction block. Others are screwed in place, but with wire connectors that are easier to disconnect. If there is no stud behind the light, these track lights can be anchored to a wall first.
Replace Track Lighting Heads
Before replacing any hardware, turn off the power to the fuse box or circuit breaker. Remove and store any track lighting heads attached to the rails. This will make it easier to install new light heads when you’re ready to reinstall your track lighting.
If you feel comfortable doing electrical work or do not want to bother about hiring an electrician. it is a good idea to replace the lights yourself. Turn off your track light control breaker and make sure it is completely disconnected. Remove the old light head by screwing it to the end of the track. If your track lighting has a dim switch, turn off the dimmer switch as well. Screw on your new light head and attach the dimmer switch if needed. Hang light jar assemblies using clips that come with your new light. Make sure everything works before you turn on your power again.
Change The Track Light Bulb
Track light bulbs are usually easy to replace. However, you must remove any cover before replacing the burnt bulb. Start by pulling the track light pins from the trim plates where they are connected Then turn the trim plate and slip a knife behind it to close it. After removing the covers, insert a screwdriver into the socket and rotate it counterclockwise, in most cases this will loose enough to easily remove the bulb with your finger, but if not you can use the pliers or your fingers to twist and pull it out. Can. By changing the bulb you can know how to replace track lighting.
Paint Patches And Ceilings
Replacing track lighting is a simple project when you know how. Applying paint to replacement trim boards allows you to match the existing ceiling color, protecting the illusion of continuous recessed light. However, choose your paint wisely. Choose an oil-based primer and topcoat for a permanent finish or a latex primer and acrylic topcoat for a temporary one. Latex paints are not moisture-resistant. They dry quickly to use on ceilings and wood surfaces that are damp but not wet.
Use a painter’s flat-head screwdriver to lift the flange that holds each light in place. Remove the screw you see and pull the old light from the ceiling or wall. If you are installing lights in a difficult place to reach, use a plier to disconnect the light wires. Remove the old lights. Light up your kitchen.
Add New Lights
Before you buy new track lighting to replace the old one, consider a few important considerations. First, some track light kits come with everything needed to replace existing lights, except for new bulbs. In this case, consider replacing the bulbs first before buying a complete kit. Contact your local hardware store or lighting retailer to see what options are available for bulb replacement before replacing the entire kit. Second, if your original track light kit is outdated, consider that it may be time to replace everything because older kits may not be energy efficient or reflective-based. If in doubt, always seek advice from certified professionals in their case.
Install New Track Lights
Lighting is one of the most important aspects of your home interior design. Track lighting can provide lighting for a part of a room or an entire space. Installing track lighting is more affordable than the pre-wired hard-word version and any repairs can be done easily. The track lights are low-profile and have a bridge attached to them. Sealed seamlessly in the ceiling. This guide will show you step by step how to replace track lighting. To install a new track light, first turn off the track light. Remove the old track light from where you want to install the new one and remove it from the power source. Install the wiring of your new track light in an electric box on the ceiling and then root the cable in a junction box outside that box.
Reconnect The New Wires
It is important to prepare yourself before starting the replacement process. Identify which wire is connected to the black wire by entering the location of the switch, circuit breaker or fixture. This will help you to reconnect the new cable properly. Now that everything has been identified and your tools are by your side. You can start removing the old track lights for easy replacement. Start by turning off the power on it. Remove old housings from new track lights so that all you need for installation are mounting brackets and bulbs. Replace any wires that have been cut and spliced in place. If there are multiple wires and there are multiple lines in a switch, reconnect any spark connection.
To replace a part of the track light you must reconnect the track to the power supply. Disconnect the old light bulb by turning it counterclockwise and taking it off the track. Once removed, remove the metal coupler from the clockwise power supply box. Insert the new light bulb into the coupler and rotate it clockwise. Reconnect the metal coupler to the power supply box by turning it counterclockwise and screwing it firmly in place. Check the compatibility of fixtures with existing tracks. You will need to purchase replacement parts that fit the track with the mount and end cap. This process will proceed smoothly.
If you replace the track light in an unused room, or in a closet or something else, you will be able to turn on the existing light. Install new lighting where it was, and simply hang it. Although track lights are being used in a busy room, I would recommend installing some ceiling can lights instead. These cables are easy to hide and do not have long tubes like track lights. So they can be easily hidden behind false walls.
Track lighting provides a bright clear light and is ideal for use in the kitchen. If you are facing kitchen renovation and have a large kitchen roof to work with, I recommend this project. Price and appearance are the two types of lighting that you can consider when making your decision. But the function is just as important. Track Lights give you complete control over the direction your light is on. Allowing you to meet any of your lighting needs. When considering wattage, you also need to consider the maximum power of each fixture. Hopefully it has become much easier for you now to figure out how to replace track lighting.